Quantum-composers 9530 Series Bedienungsanleitung PDF herunterladen (Seite 42)

Page 42 9530/8530 Manual Version 4.8

:INFOrmation

Query only. Returns model,

serial number, firmware

version, and FPGA version

numbers. The same as the

*IDN? Command.

:NSID

Query only. Returns firmware

and FPGA identification

numbers.

:CAPS

0/1 or OFF/ON

The default value is 1, which

means the unit is not case

sensitive. 0 means the

commands sent to the unit

must be capitalized.

*Note: To change this

parameter the unit must be

power cycled before the

command will take effect.

IEEE 488.2 Common Commands

Command:

Parameter Range:

Notes:

*IDN

Query only. Returns model, serial number, firmware version, and FPGA

version numbers.

*RCL

1 - 24

RECALL

*RST

RESET. Resets parameters only same as *RCL 0

*SAV

1 - 24

SAVE

*TRG

Creates a soft trigger input.

*TTG

Creates a soft trigger for the trigger input only. Used when the dual trigger

option is enabled.

*GTG

Creates a soft trigger for the gate input only. This command is only active

when the dual trigger option is enabled.

*LBL

Used to query the label of the last saved or recalled configuration.

String Value

Command to attach a string label to the current settings. The string must

be in double quotes and no longer than 14 characters. Command must be

followed by a *sav [1/2/n] command to take effect.

*Note: To see the label on the screen a display update or reboot must take

place.

*ARM

0/1 or OFF/ON

Resets all channel counters simultaneously when the channels are in

either single shot or burst mode.

*Note: The system must be in continuous mode (this command is

functionally the same as pressing the Run/Stop button).

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 70 71

Kommentare zu diesen Handbüchern

Keine Kommentare

Quantum-composers 9530 Series Bedienungsanleitung Seite 42

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Generatoren Quantum-composers 9530 Series