Quantum-composers 9250 Series Bedienungsanleitung PDF herunterladen (Seite 40)

9250 Manual Version 1.2 | Quantum Composers

40

:CMODe

NORMal / SINGle /

BURSt / DCYCle

Allows the user to select the

pattern of outputs to use on

the channel level.

:BCOunter

1 to 1,000,000

When the channel is in Burst

mode will allow user to select

the number of pulses to

output with each input clock

pulse.

*Note: The commas should

be omitted.

:PCOunter

1 to 1,000,000

When the channel is in duty

cycle mode will allow the

user to select the number of

pulses to create with each

input clock pulse.

*Note: The commas should

be omitted.

:OCOunter

1 to 1,000,000

When the channel is in duty

cycle mode will allow the

user to select the number of

pulses to suppress with each

input clock pulse.

*Note: The commas should

be omitted.

:WCOunter

0 to 1,000,000

Allows user to select how

many clock cycles to wait

until the channel should start

creating an output pulse.

*Note: commas should be

omitted.

:CGATe

DIS / LOW / HIGH

Channel Gate Subsystem.

Contains commands to

control using the gate input to

control the output channel.

Command

Keyword 1

Keyword 2

Keyword 3

Parameter Range

Notes

:SYSTem

Command to change the

units’ system settings.

:STATe

?

Query Only Command

:BEEPer

Command to change the

units’ beeper settings.

:STATe

0/1 or OFF/ON

Command to turn on or off the

systems' beeper.

:COMMunicate

Command to set the

communication settings.

:USB

:ECHo

0/1 or OFF/ON

Command to Enable/Disable

the echo function on the RS-

232 interface. The Echo

function will cause the unit to

repeat the command received

to the PC.

:BLUEtooth

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 50 51

Kommentare zu diesen Handbüchern

Keine Kommentare